SCANNER BMW OPS
Harga Rp 15,000,000,-
Hub: 0853-1715-2322
Khusus mobil BMW
Specification:
Introduction :OPS is mainly used for diagnosis and programming BMW vehicles after E65 series .
OPS unit with DIS software is used for diagnosis , which is carried out via OBD-II socket .OPS unit with SSS software is used for programming , which is carried out via OBD-II socket and MOST socket .
Commodity : BMW OPS
Standard Configuration:
1. OPS multiplexer
2. OBD-II diagnostic cable
3. LAN cable
4. OPS MOST cable
5.80G HDD with preinstalled SSS V20 for IBM T30
6.80G HDD with preinstalled DIS V52 for IBM T30
Warranty: one-year product quality warranty
After sale service:
1) Free update during one year
2) Free repair and maintenance service in one year
3) Free technical support by internet or via phone
SCANNER BMW GT1 Pro Fit
Harga Rp 7,900,000,-
Hub: 0853-1715-2322
Khusus mobil BMW
Specification:
BMW group tester one (GT1) pro fit (Tidak menggunakan IBM T30, Bisa ) : is offered to the aftermarket in the same specification that is currently supplied to BMW franchised dealers. It is special-purpose tool of BMW Series.
Gt1 is supplied with a Pentium based laptop PC on a Windows platform connected to a high specification communications and measurement interface.
GT1 can complete coverage of ALL BMW systems, one thing that can only be done using the GT1, this function is called Electronic Control Unit (ECU) programming and configuration. Many of the original electronic systems on modern vehicles can now be re programmed using software; historically any changes to rectify software problems would involve a new ECU which would be purchased from the parts department and that is the only way that the independent market today is able to overcome these problems. The BMW GT1 system allows you re programme all BMW car ECU's to fix software or to install a blank ECU to a repaired vehicle. GT1 is the only system that allows you to do this and is absolutely essential if working on Freelander , the GT1 is also the only system that provides all diagnostics and programming for the very latest BMW launched this year.
BMW GT1 software kit comprises of five system ,TIS system .DIS data system ; diagnosis system .measuring system and manangement system . you can to test and check data information same time in GT1.
Test function :
Read faulty code ,clear faulty code ,data stream .activate state,programming ,component test ,maintenance data information ,components location ,wiring diagram etc...,TIS AND DIS ARE SUPPLY all of system diagram of all of BMW car, Components location, maintainence method and coding information etc. Can do completely of BMW car system.
1. GT1-SCAN Pro mainbody
2. Network cable
3. GT1 for vehicles with 20pin diagnostic connector
4. GT1 for vehicles with OBII diagnostic connector
5. Latest diagnostic version of software(One HDD)
SCANNER BMW INPA
Harga Rp 2,050,000,-
Hub: 0853-1715-2322
Specification
Interface USB OBD2 for BMW - INPA/Ediabas - K+DCAN allows full diagnostic of BMW from 1998 to 2008 (all functiosn as in OMNITEC interface). Build in 2 lines K and D-Can magistral
Features
- read and delete errors
- adaptations
- driver programming
- applu coding
- and others...
Supports protocols:
1. Fast magistral D-CAN and PT-CAN (500 kbit/s)
2. Slow magistral K-CAN (100 kbit/s)
3. Standard BMW protocol (BMW OBD interface).
D-CAN for:
- E60, E61 od 03/2007
- E83 od 09/2006
- E81, E87 od 03/2007
- E90, E91, E92, E93 od 03/2007
- E70 (new model X5)
- R56 (new model MINI)
PT-CAN, K-CAN - fully switchable speed of migistral CAN - ou can diagnose driver withtou any car
Protocol "BMW OBD interface" for older cars:
- from 1995 to 1998 (don't need K-line).
- from 1998 to 03/2007 (all models)
Mitsubishi MUT-III
Harga Rp,81,200,000,-
Hub: 0853-1715-2322.
Specification:
Features
1.Color Display.
2.Fast vehicle scan.
3.Laptop is battery powered or powered via vehicle cigar lighter/power outlet.
4.Data Display utilizes either graphical or digital display.
5.Can perform drive recorder on most Mitsubishi vehicles.
Package Including
1.MUT III Scan Tool Kit.
2.Vehicle Communication Interface (VCI).
3.Multi-Meter Adapter Harness.
4.USB 2.0 cable.
5.Harness A (blue).
6.Harness B (red).
7.Harness C (yellow).
8.Compact Flash 128MB Memory.
9.Compact Flash Adapter.
10.MUT-III case.
A personal computer (PC) is connected to the MUTIII unit and used as a system’s control terminal, and communicates with a vehicle ECU through the V.C.I.. In addition to being able to handle all diagnosis functions covered by the conventional MUT-II tester, the MUT-III system can display data as easy-to-understand diagrams and graphs on a large screen of the PC. Unlike the MUT-II, the MUT-III can retain data on all vehicles, from old to new models, classified according to destination in the PC’s hard disk. This eliminates the awkward but essential job with the MUT-II, of switching the data list (communications protocol data and diagnosis item list database) by replacing the ROM pack with another according to the vehicle model and year model.
New functions that make use of the advantages of the PC are also being developed. For example, the workshop manual viewer is a useful function for mechanics as they no longer have to carry around a thick manual and search for relevant pages while working on a vehicle. The workshop manual viewer is currently available for certain vehicle models, and allows users to retrieve the pages containing the failure code for a particular problem at the push of a button.
Please note the following
1.MUT-III supports CAN vehicle protocol.
2.Reprogramming 2002 and up Montero and 2003-2005.
3.Outlander will require the purchase of MB991855 (12-13 Pin Reprogramming Adapter).
4.MUT-III updates are forecasted for DVD/CD updates at a later date.
5.Mitsubishi Motors North America reserves the right to change to internet subscription.
--------KETERANGAN--------
1.(CARA PEMESANAN/PEMBELIAN):
CALL/SMS Ke_: 0853-1715-2322.
Ketik:[Nama][Alamat Lengkap][No.Hp][Merk/
2.(CARA TRANSAKSI/PEMBAYARAN BARANG);
1. Pembayaran diselesaikan/di kirim melalui via rekening Bank, bisa ke_BRI,BNI,BCA & Mandiri.
2. Untuk No Rekening akan diberitahukan melalui SMS setelah Barang DEAL,untuk menghindari adanya penyalahgunaan rekening.
3.Setelah pembayaran diselesaikan dan barang akan siap untuk di kirim melalui TIKI/JNE atau ada ekspedisi pengiriman lain yang anda pilih.
Status pengiriman bisa dicek lagnsung dengan memasukkan no resi pengiriman di www.jne.co.id
4.Pengiriman barang melalui jasa pengiriman TIKI/JNE paling lambat datangnya barang 1-2 hari,(tergantung dari kota tujuan).
5.Apabila barang pesanan anda sudah sampe atau sudah di tangan anda,namun tdk sesuai yang anda pesan atau tdk ada kecocokan,barang bisa di tukar kembali atau bisa di kembalikan ke toko kami,dan uang anda akan di kembalikan 100%,tanpa di potong.
----------ANDA PUAS KAMI SENANG" TERIMA KASIH----------
